Multifunction DAQ with Ethernet and USB
The T7 with 16 to 24-bit analog inputs, the option to use USB, Ethernet, or WIFI (T7-PRO), and numerous built-in firmware features, the T7 Series can help you accomplish nearly any data acquisition need.

It's great for acquiring signals from virtually any kind sensor, and can serve that sensor data out through any of its 3 communication interfaces. With instrumentation amplified inputs, software selectable gain settings, dozens of digital I/O features, and a Modbus TCP front-end, the T7 Series is our most versatile multifunction DAQ platform. Common applications include laboratory research, industrial control and monitoring, and prototype development. Additionally, the T7 series devices are capable of stand-alone operation by running Lua Scripts

Analog Inputs

• 14 Analog Inputs built in (16-24 Bits Depending on Speed & Device Type)
• Expand to 84 analog inputs with Mux80 add-on
• T7: 16-bit high-speed ADC (up to 100k samples/s)
• T7-Pro: 24-bit low-speed ADC (resolution as low as 1uV noise-free)
• Software Configurable Resolution Settings
• Single-Ended Inputs (14) or Differential Inputs (7)
• Analog input ranges: ±10V, ±1V, ±0.1V and ±0.01V
• All analog input features are software programmable by configuring the Analog Input Registers
• High speed sampling configurable by using Stream Mode. Speeds up to 100kS/s
• Low Latency Sampling and Control (less than 1ms) is made easy with Command-Response Modbus messages
• Easy integration with sensors like thermocouples, load cells, bridges, and more ...

Analog Outputs

• 2 analog outputs (12-bit, 0-5V)
• Waveform generation via Stream Out
• Integrated LJTick-DAC support for multiple +/-10V outputs

Digital I/O

• 23 Digital I/O
• Supports SPI, I2C, and more... (Master Only)
• 5 PWM Outputs with individual phase control
• 5 Pulse Outputs with configurable number, frequency, and width
• 2 Frequency Inputs returning both frequency and period
• 2 Pulse Width Inputs measuring time spent high and low as well as duty cycle
• 2 Line-to-Line Inputs measuring the time between edges on 2 different lines
• 4 High-Speed Counters
• 6 Software Counters w/ debounce capabilities
• 6 Quadrature Inputs
• Information about Digital I/O features can be found in the DIO Extended Features section of the T7's datasheet
• Fixed Current Outputs
• 200 µA
• 10 µA

Communication Options

• USB
• Ethernet
• 802.11b/g WiFi
• Modbus

Other Highlights

• Capable of stand-alone operation by running Lua Scripts
• Built-In CJC Temperature Sensor for easy thermocouple temperature readings
• Watchdog system
• Field Upgradable Firmware
• Programmable Startup Defaults
• Industrial temperature range (-40 to +85C)
• For more information please visit the hardware overview section of the T7's datasheet.

Documentation:

• LabJack Manuf. Documentation
• LabJack Data Sheet
• LabJack Downloads