A simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated voltage. The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. Pins labeled VCC and GND plug directly into the power lines. The lone pair of pins have no electrical connection but help support the PCB.
There are two pins available within the barrel jack footprint. Any stripped +/- DC supply can be connected instead of the barrel connector. Board has both an On/Off switch and a voltage select switch (3.3V/5V).
DC Barrel Connector (2.1mm center positive)
TO-220 Voltage Regulator (LM317 1.5A max current)
1N4004 Reverse Protection Diode
100uF 25V Capacitor
10uF 25V Capacitor
0.1uF 50V Capacitor
Red Power LED - High Brightness
2pcs SPDT Slide Switch
4pcs 0.1" Header Pins
2pcs 330 Resistor 1/6W
390 Resistor 1/6W
240 Resistor 1/6W
Bare PCB with Silkscreen Indicators
PTC resettable fuse